-
Release time: 2022-03-12
Planetary gearbox may have some common problems during operation, such as noise, lubrication, bearing and other problems, some of which may be quality problems or maintenance problems during use. We share the relevant introduction to the common problems o
-
Release time: 2022-03-11
Planetary gear gearbox is also called planetary gearbox, servo gearbox. Among the gearboxs, planetary gearboxs are widely used in servo motors, stepper motors, DC motors and other transmission systems due to their small size, high transmission efficiency,
-
Release time: 2022-03-11
The purpose of analyzing the failure mode of gear transmission is to find out the reason for the failure of gear transmission, formulate the calculation method of strength, or propose measures to prevent failure, so as to improve its bearing capacity and
-
Release time: 2022-03-10
Planetary gearbox is a relatively precise gearbox. Different from the worm gear structure, it uses planetary gears and sun gears to decelerate, which can control the precision within a very small range. However, it is a very troublesome thing for the plan
-
Release time: 2022-03-10
For a qualified precision planetary gearbox, the accuracy at the factory should be able to meet the accuracy requirements and standards at the time of design, but why some customers feedback after a period of use that the accuracy cannot reach the standar
-
Release time: 2022-03-09
The NEUGART brand has a long history of nearly 100 years. It has 8 subsidiaries around the world. Parts are manufactured in Germany. China and the United States are the two major assembly plants. The product series is rich and has hundreds of reduction ra
-
Release time: 2022-03-09
When choosing a planetary gearbox, you need to pay attention to the introduction of some parameters of the gearbox. The gearbox is a product with relatively high precision. If the selection is not done well in the process of use, or the size is wrong. It
-
Release time: 2022-03-08
Selecting the appropriate output shaft of the planetary gearbox, stepping can effectively provide efficiency, and can also reduce some unnecessary losses during use, thereby ensuring an economical and safe working environment. The internal structure of th
-
Release time: 2022-03-08
First, determine the flange size of the gearbox connection according to the external dimensions of the motor, and then select the connection method. There are two connection methods between the motor and the gearbox, namely B5 and B14. B5 means that the m
-
Release time: 2022-03-07
1. Input terminal When the Neugart planetary gearbox is connected to the servo motor, there are threaded holes on the adapter plate of the planetary gear……
-
Release time: 2022-03-07
The runout of the output shaft is unavoidable, and the runout of the shaft can only be reduced as much as possible. When installing the gearbox, it should be installed in the center of the load end. After installation, turn the input end of the gearbox, a
-
Release time: 2022-03-05
Coaxial planetary reducer (gear reducer), also known as in-line reducer (reducer), the drive shaft and output shaft are on the same rotating shaft. Coaxial planetary reducers usually take the form of spur gears. Spur gears are available in different versi
